DUV-1000 QUICK CONFIGURATION  
 
             
Step 1: Connect the DUV-1000 to your dial up internet connection
Step 2: How to enter alphanumeric and special characters
Step 3: Configure ISP (Internet Service Provider) parameters
Step 4: Configure deltathree Calling Card parameters
Step 5: Start using your DUV-1000
 
Step 1: Connect the DUV-1000 to your dial up internet connection
 
  1. Connect the handset to the side of the DUV-1000 with the handset cord.

2. Connect your dial up internet connection to the DUV-1000. Plug one end of your telephone cable (RJ-11) into the LINE port at the back of the DUV-1000 and the other end into a working telephone wall jack.

3. Connect the power adaptor to an AC outlet and the power cord into the connector marked “AC” on the bottom of the DUV-1000.

4. Lift the handset and listen for the dial tone that indicates the DUV-1000 has been installed properly. If you do not hear a dial tone, check that the power adaptor is plugged into a live electrical outlet and that the power cord is pushed securely into the connector.
 
  back to top  
Step 2: How to enter alphanumeric and special characters
 
  Lower case letters:

Press a digit key two times to enter the first character written on that key.
Press three times to enter the second character written on that key
Press four times to enter the third character written on that key.
Press five times to enter the fourth character written on that key.

For example, to enter "e" press the 3 key three times quickly. If you press the 3 key three times slowly, you will enter "333".

Capital letters:

Press the SHIFT button and then the corresponding letter following the instructions for lower case letters.

Special Characters:
 
@ At   Press DIAL UP 1
. Dot   Press DIAL UP 2
- Hyphen   Press DIAL UP 3
_ Underscore   Press DIAL UP 4
$ Dollar   Press DIAL UP 5
& Ampersand   Press DIAL UP 6
/ Slash   Press DIAL UP 7
: Colon   Press DIAL UP 8

Example of how to enter "teSt_1":

Press the 8 key twice   t
Press the 3 key three times   e
Press SHIFT and then the 7 key five times   S
Press the 8 key twice   t
Press DIAL UP and then the 4 key   _
Press 1   1


Other useful tips:
  • Press DIAL UP and then 0 to backup one character.
  • "2" at the end of a step lets you re-enter the field value.
  • If you have to enter one number multiple times in succession - press the key once, wait a few seconds, and press the key again. For example, for the number 33, press 3, wait a few seconds, and press 3 again. If you press the 3 key twice quickly, you will enter the letter "d".
 
  back to top  
 
Step 3: Configure ISP (Internet Service Provider) parameters
 
  1. *123*# (enter menu)

2. 12345# (menu Password)

3. 1 (ISP parameters)

4. 1 (edit ISP Phone)

5. Enter ISP phone followed by #

6. 1 (1 to accept or 2 to re-enter)

7. 1 (edit ISP username)

8. Enter ISP Username followed by #

9. 1 (1 to accept or 2 to re-enter)

10. 1 (edit ISP Password)

11. Enter ISP password followed by #

12. 1 (1 to accept or 2 to re-enter)

13. 5 (save and quit)

 
  back to top  
 
Step 4: Configure deltathree Calling Card parameters
 
  1. *123*# (to enter to menu)

2. 12345# (Menu Password)

3. 2 (Calling Card parameters)

4. 1 (edit Calling Card User_ID)

5. Enter Calling Card User_ID 8 digits followed by #

6. 1 (1 to accept or 2 to re-enter)

7. 1 (edit Calling Card Password)

8. Enter Calling Card Password 4 digits followed by #

9. 1 (1 to accept or 2 to re-enter)

10. 5 (save and quit)

 
  back to top  
Step 5: Start using your DUV-1000
 
  You are now ready to make and receive calls. Press the “DIAL UP” button so that the DUV-1000 connects to the internet and then dial the telephone number. Make sure to dial country code, area code, and the number followed by # - even for local phone calls: e.g. USA call 1-212-555-1212 #.

To make regular PSTN calls, pick up the handset (do not press the “DIAL UP” button) and make sure to dial country code, area code, and the number followed by # - even for local phone calls: e.g. USA call 1-212-555-1212 #.
 
  back to top